Gasoline motorized winch, diesel motorized winch, tractor winch (modified from Taishan 280 and 500)
The model of the grinder: 3T 5T 8T
The operation method of 3T motorized winch and 5T motorized winch:
1. Before starting the machine, please open the drive clutch of the winch mill, and turn the front and rear shift levers to the neutral position, and then start the machine.
2. When dialing the clutch, the action should be fast and crisp, otherwise the interlocking brake will not work, which will increase the impact force of the automatic brake pawl. It is not advisable to use too much force when starting the machine, until the pulley can drive the input shaft to rotate without slipping.
3. When shifting gears, the transmission clutch must be opened, otherwise the gears may be damaged. After shifting, check whether the shifting process is firmly engaged to prevent the phenomenon of skipping and disorderly shifting.
4. During the shifting process, if it is difficult to change the gear and enter the gear, do not force the shifting, you can use the hand crank device to help you enter the gear. block.
5. The allowable load on the reel is HB-3T: 3000 kg at slow rotation,
According to the transmission mode: belt drive, belt drive winch, shaft drive.