产品banner

Home -

Products

5 ton double drum engine powered winch (belt drive)

Product details

 Product number 

         Model        

  Turn face  

   Gear   

 Rotating speed

(rpm) 

 Line speed

(m/min) 

 Traction

(T) 

 Power

(kW) 

 Dimensions

(mm) 

Weight

(kg)

B1031

ZJ-QXS-50/25  

For Honda 

GX390 

Gasoline/Yamaha 

MZ360   

Gasoline engine/domestic

188F

gasoline engine

genuine

(slow)

/

5.5

5

6.6

1350x820x580

Single machine weight : 224

Ⅱ 

(slow)

/

8

3

fast

/

16

1.5

power weight:34


  (fast

/

25

1.0

reverse gear

slow

/

3.5

Lifting is strictly 

prohibited

Wooden box weight:22

fast

/

10.5

B1032

ZJ-CXS-50/25  

Package186F 

vertical hand pull 

diesel engine

genuine

(slow)

/

5.5

5

5..7

1350x820x630

Single machine weight:212

Ⅱ 

(slow)

/

8

3

fast

/

16

1.5

power weight:60

Ⅱ 

fast) 

/

25

1.0

reverse gear

slow

/

3.5

Lifting is strictly 

prohibited

Wooden box weight:28

fast

/

10.5

The structure of the grinder

The motorized winching mill is composed of a drum wheel, a gearbox, a diesel engine or a gasoline engine and a base frame. The working principle of the motorized winching mill: the winching groove is a traction groove used to directly connect with the wire rope. It is powered by a gasoline engine or a diesel engine and an electric motor. The speed of the box can be adjusted to achieve the required speed. The whole machine is located on the steel structure, which is stable and easy to move.

How to operate a engine powered winch:

1. Before starting the machine, you must first open the drive clutch of the winch mill, and turn the front and rear shift levers to the neutral position, and then start the machine.

2. When dialing the clutch, the action should be fast, otherwise the interlocking brake will not work, which will increase the impact force of the automatic brake pawl. It is not advisable to use too much force when starting the machine, until the pulley can drive the input shaft to rotate without slipping.

3. When shifting gears, the transmission clutch must be opened, otherwise, the gears will be damaged. After shifting, check whether the shifting is firmly engaged to prevent jumping.

4. In the process of shifting gears, if it is difficult to enter the gear, it cannot be forced to enter the gear. You can use the

The hand-crank device helps to block the specific method: use the wrench to turn the hand-crank device to rotate it by an angle, and then the block can be entered.



相关标签: 绞磨,5吨双卷筒机动绞磨(皮带传动)价格,5吨双卷筒机动绞磨(皮带传动)批发

Copyright ©http://www.andeschina.net/ Changshu Ande Electric Power Equipment ManufacturiPowered by Clouds platform  Technical Support:Xiangyun Platform